 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan/light wiring
I have a fan/lighy combo switched separately,and the light is on a three way switch. I wish to remove the fan/light combo and replace it with a simple ceiling fixture. I wish to retain the three way capablity for the ceiling fixture. The wires in the fixture are black ,white,red,and a copper ground.do I wire the black,red, and the ceiling black wire together?
|
||||
Check out some similar questions!
I am replacing a ceiling fan that has no light with one that has a light included. The wall switch that controlled the old fan included an OFF position plus three fan speeds. The ceiling mount has four wires: red (that didn't connect to anything before), black, white and bare copper. The fan...
Am trying to rewire up a ceiling fan with light to ceiling box -- of course, like an idiot, I didn't write down how it was wired before, because, hey, how hard could this be, right? Ceiling box has these wires: 3 blacks, twisted together 3 white, twisted together 1 red 3 copper grounds...
hi, how do I wire ceiling fan/light -?fan has blk,white, blue and grd.=ceiling box has -red ,blk,white and grd.--wall box has 2 wire cable coming in- blk,white and grd.(power)and 3 wire going to fan-red, blk,whiteand grd. My sw-(lutron)fan/light combo-has red,yellow ,blk,green grd, Iam really...
Where does each wire go? I have 2 pull chains, 1 for the light and 1 for the fan. The fan is a multi-speed. There are 7 wires coming out of the fan box.
I just moved into a new house and I'm installing ceiling fans. I've installed 4 other ceiling fans with no issues and on my last one I'm scratching my head. For each fan I'm installing a switch with a separate fan and light controller on the wall (side by side sliders). There are 3 wires on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
