Ask Experts Questions for FREE Help !
Ask
    moley65's Avatar
    moley65 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2012, 04:50 PM
    Kenmore Elite Ultra wash dishwasher start, cancel and delay won't work
    I have a Kenmore Elite Ultra wash quiet guard dishwasher and the right 3 buttons will now not work when pressed (delay, cancel and start).
    I have put into the forced cycle (normal wash / heated dry etc) and all the lights come on for everything (including the right 3) but if I hit cancel, it won't stop.
    When this maintenance cycle finishes the 3 right buttons will still not work (all other buttons work fine and light comes on when pressed).
    Any help of what I need to replace would be great. I took panel off but couldn't see any loose connections.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Sep 29, 2012, 04:15 AM
    It sounds like some water and dirt got onto keypad. Remove parts until you can peel off rubber keypad and clean surface on circuit board and on rubber keypad with soap and water and then alcohol. Make sure to turn off power first. If keypad does not have rubber cover it is a different type and you cannot clean it as easily. The rubber cover is like the ones on remote controls which are cleaned the same way.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Ultra wash 665 dishwasher stops and flashes 'start/resume'. [ 2 Answers ]

Model is 665-13129k703, about a year old. It does this during Smartwash HE and Normal (both with heated dry) cycles. Input water is hot (~120 degrees), drain is clear, checked filter baskets, door is closing correctly. It doesn't do this every time but most times. Everything else seems to be...

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? [ 1 Answers ]

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385

View more questions Search