Ask Experts Questions for FREE Help !
Ask
    mtsthelen's Avatar
    mtsthelen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2012, 06:52 AM
    How to remove retaining ring from maytag washer model sav4655eww
    We got as far as coblas idler pulley at bottom of machine inner metal sleeve still on shaft too how to remove the retaining ring?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 27, 2012, 01:53 PM
    If you are speaking of part number 11, you remove that with a pair of snap ring pliers.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove kenmore washer timer part no: 3356457 from washer model 110.92283100? [ 2 Answers ]

My kenmore washer model 110.92283100 does not advance to next function, it still do the work if I use my hand to turn to the next function. So I thought that my washer timer part number 3356457 is at fault. I have no instruction to remove the timer from its control panel and I do not want to break...

What is the difficulty level to replace a balance ring on a maytag washer, mavt754eww [ 0 Answers ]

Remove comode hold down retaining ring? [ 1 Answers ]

My comode hold down retaining ring is broken and I can not tighten down the comode can this retaining ring be removed snd replaced

Maytag washer SAV4655EWW is noisy during spin cycles. [ 5 Answers ]

Washer has a loud, deep, rhythmic rattle which sounds like it comes from the center, maybe near the bottom of the agitator. The wash loads are always carefully balanced and the washer is level.

How do you replace the retaining ring and o ring ( part no. 101879 ) [ 0 Answers ]

I have a leak where the spout and faucet connect, do I need to take the enite faucet of the sink to replace the o-ring?

View more questions Search