Ask Experts Questions for FREE Help !
Ask
    Brian s's Avatar
    Brian s Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2012, 06:56 PM
    Coleman furnace
    I have a gas furnace every thing work when the gas valve opens it closes instantly. What is wrong
    Brian s's Avatar
    Brian s Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Sep 26, 2012, 06:58 PM
    I have a Coleman gas furnace I have a call for heat inducer motor comes on press switch closes igniter comes on when gas valve opens it closes instantly what's wrong
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Sep 26, 2012, 07:01 PM
    Clean the flame sensor with steel wool or sand paper.
    Brian s's Avatar
    Brian s Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Sep 26, 2012, 07:08 PM
    I can't even get a flame to come on
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman furnace [ 8 Answers ]

I have a coleman furnace. The burner will turn on but shuts off after about one minute before reaching desired temp. Any idea why?

Coleman furnace [ 0 Answers ]

Pilot lites up, blower comes on, but no flame up.

Coleman Furnace [ 1 Answers ]

I have a Coleman Furnace in my mobil home and it keeps shutting off and won't hold a temperature. I have had a furnace company out and they replaced a gas valve but it did not help. To get the furnace to start back up I have to turn the thermostat off and then back on. It will run for a while the I...

Coleman Furnace [ 2 Answers ]

Our furnace is kicking on and off. Then it'll kick, but not go further to turn on the blower and heat? Do you think control issue or booster assembly>

Coleman Furnace [ 1 Answers ]

Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with...

View more questions Search