Ask Experts Questions for FREE Help !
Ask
    469273's Avatar
    469273 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 26, 2012, 07:38 AM
    Angle grinder arbors for cut off wheels
    Where can I buy the bottom(grinder side) of the arbor/adapter for cut off wheels. I have the screw on top side, need bottoms has no threads in it but has counter sink for top to screw into so wheel will be centered. Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Sep 29, 2012, 08:01 AM
    Hi,
    Have you thought that maybe a brand and a model might help?
    Peace,
    Clarke
    That info in hand, try eReplacement Parts at:
    Repair Parts for All Major Brands - DIY Repair | eReplacementParts.com

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Angle grinder blade [ 3 Answers ]

I have a 4" angle grinder. Many of the cut off saws show 4 1/2". Do You think it will fit the grinder? Or do I keep looking for a 4" Cut off saw

Angle grinder cut off wheels [ 3 Answers ]

The 4 1/2 angle grinder 5/8-11 spindle 7/8 arbor adapter. The cut off wheels lay too flat. I do not see any arbor adapter in the box. To elevate the wheel so it will not bind and rub. Something is missing. Did I Buy the wrong cut off wheels? See picture

What angle do I cut to get a 120 degree angle? [ 4 Answers ]

I want to get a 120 degree bend. What angle to I cut the two pipes that go together to make the 120 degree angle?

Miter cut angle [ 1 Answers ]

I know it's a bevel cut. The fascia boards are joined at the corners. I tried a 45 degree bevel Angle but the boards cuts would not line up. What is the adjustment # on the miter saw?25768 My Miter saw only banks to the left for fascia boards, trim, maybe that is the problem?


View more questions Search