 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No cold water pressure to first and second floor bathroom sinks
I have no cold water pressure to first and second floor bathroom sinks and toilet tanks are not filling. Have checked that all valves are open and cannot find any leaks in line to first floor bathroom. Plenty of hot water in the bathrooms. The cold faucet on the sink in the first floor bathroom is leaking at the base. Could this possibly be causing all these problems. These fixtures are clearly all on the same water line. Thanks for any help
|
||||
Check out some similar questions!
This water ran for days & was undetected until it was coming out the side of the building. Water ran through carpet, carpet pad, subfloor, insulation, carrying cat & dog urine residue & fecal material with it then through another floor,with carpet, pad, etc. To the bottom floor. With at least 12...
Hi All I had plenty of pressure in the bathroom but it has just started dribbling from the taps now. Pressure is fine everywhere else. Any ideas Thanks
In the last few days, the cold water pressure in my bathroom has gone. It is affecting the sink, bath and toilet but the hot is fine. The source to the bathroom is from a water tank in the loft. All other water is sourced through the mains and is fine. What can I do to fix it without calling...
Bathroom toilet is very slow to fill up also cold water tap in bathroom when turned on has little or no water coming out of it.can you reply staight away please.
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
