 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cracked Hot Tub Repair
Have a Free Flow hot tub. There is a crack in the main body. I have repaired it with epoxy, silicone and used a pvc glues with material for my raft. The glue and raft material lasted the longest but there must be a better way. Any thoughts
|
||||
Check out some similar questions!
I had quite the sewer backup going on last night, had the drain guy out had a great time trying to find the clean out which was under a platform in front of the utility sink in the bathroom. That being said, sewer snaked to 110 feet and toilets flushing and water draining... However, when we looked...
Do any of those cracked block , blown head gaskets ,leaky radiator repair fluids work? If so which works best?
House built in the 50's, and the original drain pipe from the 1st floor tub extends about 12" down into the garage below. This pipe has cracked/crumbled right at the elbow (has a small bend that looks like a 5" trap) before running horizontal with the garage ceiling. What is the best way to fix...
I have steps in the back of the house that are poured cement, about 6 inches thick, sitting on top of a wood and stucco structure. Embedded in the steps is a metal handrail. Every step where the metal is embedded is cracked and broken. I believe that over the years, water has snuck in between...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
