Check out some similar questions!
Rth221b diythermostats.honeywell.com
[ 2 Answers ]
I'm connecting my new thermostat with two wires, one red and one white. When connecting the red wire does it go directly in the rh slot along with the jumper that is already in place? I had it set up this way and my heat would not come on. I put the old thermostat back up and it worked fine. Any...
Diythermostats.honeywell ?
[ 0 Answers ]
I hooked up the rct8100, I hooked the wires as followed the red to the rc and rh while both are jumpe together and the white to g. Was that right
I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell
[ 1 Answers ]
I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell thermostat model RTH111. The old thermostat has two wires (colors white and red) but no designation on the terminals. This is for a hot water baseboard gas fired boiler. Which terminals do these unmarked wires...
Diythermostats.honeywell ?
[ 7 Answers ]
Thermostat will not go below 60 when setting temperature for 55 degrees while trying to lower temperature.
Diythermostats.honeywell.comhow doideprogramthe thermostat
[ 2 Answers ]
How do I deprogram a RTH221B thermostate View more questions Search
Add your answer here.
|