 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We have a gas furnace with two thermostats and forced air on the second floor. The heat works fin everywhere but the second floor. The temperature is dropping and the registers have cold air blowing out of them. Any suggestions on what the problem could be?
I have a Rheem forced air gas furnace. The pilot will light manually and will run properly for a while, but it cuts off before reaching temperature and the pilot goes out. I've relit it several times, but it keeps doing the same thing. Any suggestions?
I am afraid of a gas furnace, for fear of an explosion. I have had this fear since I was a little boy. Hence, I simply must have an electric heating system. However, the area in the MidWest where I have been considering has almost no electric homes, mostly because of the high electric rates...
Tenant just reported that the heating system is not working. Over a 3 or 4 day period the system was working sporadically. Original issue was that the furnace would kick on, the blower start, and heat the house. Over a period the room would reach temp but the blower would stay on and continue to...
I disconnected my thermostat from the gas tempstar furnace and also disconnected two wires I traced to the central air conditioner. I do not know where to connect the air conditioner black and white wires to on the W,Y,R,G,C. I do not have a manual. Can someone help me?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
