Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a Bathtub/venting
[ 1 Answers ]
I have a half bath upstairs and am changing it into a full bath. I have a 2" vent pipe for the lower bathroom (which was run in the wall i removed to fit the tub) which runs up through the middle of the room and back into the stack for ventilation. The upstairs sink runs 3 feet directly into the...
Replacing existing shower set
[ 3 Answers ]
Hi, I was a HomeDepot Expo today to buy new shower sets to replace the ones in our existing house (about 10 years old) and they told me something I wasn't sure was true. They said I should replace the old shower set (handles and shower head) with the same brand as the old one unless I planned to...
Bathtub Venting question
[ 3 Answers ]
I'm in the process of remodeling a basement bathroom directly next to an exterior wall. Previously there was a shower and now I want to put in a bathtub. When I took out the fiberglass shower, I found that the shower drain was connected directly to the main waste line leading out of the house. ...
Venting new bathroom into existing vent
[ 1 Answers ]
I'm in the process of adding an additional bathroom on the 3rd floor of our house. My question is this, can I vent this bathroom into the 2nd floor bathroom vent, which about 10 feet away from my planned 3rd floor waste line? Are there any restrictions on how many horizontal feet versus vertical...
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line... View more questions Search
|