Ask Experts Questions for FREE Help !
Ask
    mydeemouse's Avatar
    mydeemouse Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 15, 2012, 12:16 PM
    Replacing Cam Sensor
    How do I replace a cam sensor on a 2001 Ford F250 7.3L powerstroke diesel?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 15, 2012, 12:30 PM
    Most likely, you remove the cover plate behind the pulley, remove the 10mm mounting bolt, twist and remove the sensor, and unfasten the connector. Before installing the new Camshaft Position Sensor, coat the O-ring with engine oil.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where is the cam position sensor on my 97 camry [ 1 Answers ]

Where are the cam position and crankshaft sensor located on my 97 camry

99 tahoe cam sensor [ 8 Answers ]

hi this is my first post. I have been trying to find an answer all over and hopefully someone here can help! I have a99 chevy tahoe 4x4 and the code for my camsensor came up. I have changed the sensor and still have the same code. It misses at highway speeds (not continually most when I go up a...

F 350 2006 cam sensor [ 2 Answers ]

I have truck F 350 Not start Year 2006 "cam sensor no good" Ask is what is Cam sensor, what is position Plese help me

Where is cam sensor? [ 1 Answers ]

Hello , I have a 1997 GMC yukon four wheel drive, 5.7 L. engine, automatic trans. Engine light turned on so I went to autozone for an analysis which came up as being the crank or cam censor, so I bought them both. I know where the crank sensor is but I don't know where the cam censor is. Can...

View more questions Search