Ask Experts Questions for FREE Help !
Ask
    brianwinters76's Avatar
    brianwinters76 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 14, 2012, 09:57 AM
    2007 Ford Escape will not go into gear, why?
    I have a 2007 Ford Escape FWD. It has been a great vehicle thusfar until just today. I simply got into it to go to the store. When I put in to drive it gave a small jolt but took off with no issues. A half mile down the road when it should have shifted to 2nd gear it did not and my acceleration was lost. I stopped. Turned it off then restarted it and was able to get to 2000 RPM before it acted like it wanted to shift and again I lost the acceleration. I am stumped. I am truly hoping I do not have to replace the entire transmission
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 14, 2012, 10:36 AM
    Have Ford run diagnostics on the car. It may be something unexpected, such as a faulty MAF Sensor and/or MAF wiring harness.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where are all the fuses for a ford escape [ 1 Answers ]

Where are the fuse boxes on a2002 ford escape?

2007 ford taurus transmission won't engage in any gear. [ 1 Answers ]

I have a 2007 ford taurus and the transmission won't engage in any gear. There were signs of this before. When I shift the car into drive or reverse nothing happens, not even any weird noises. Anyone have any suggestions

Gear Shifting 2007 Ford Escape [ 4 Answers ]

Hi guys! I have a 2007 Ford Escape FWD with an automatic transmission. When I put it in D or R position it shifts with a very loud click(snap). A weird metallic noise(metal to metal). After that it runs smooth, no problem with shifting at all. I have the feeling though that it would brake the...

Gear Shifting 2007 Ford Escape [ 1 Answers ]

Hi guys! I have a 2007 Ford Escape FWD with an automatic transmission. When I put it in D or R position it shifts with a very loud click(snap). A weird metallic noise(metal to metal). After that it runs smooth, no problem with shifting at all. I have the feeling though that it would brake the...

View more questions Search