Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cold air return in unfinished basement
[ 1 Answers ]
Hello, My house is just over 4 years old and I have had problems balancing the air on the main level from the time I bought it. One room will be 8 degrees different from another. I also have an unfinished basement where I have had moister problems since I bought it. No leaks but a lot of...
Can I replace 12x8 cold air return duct with 12 inch flex duct in my basement?
[ 2 Answers ]
I need head room in my basement and want to take down the old cold air return metal duct work 12x 8 and re-route to the plenum with 12"flex duct. Will this be a problem with the furnace working properly? Please advise
Cold air return in basement question
[ 0 Answers ]
My home is new construction; 2 story with a basement. I have a 2 ton HVAC unit. I am finishing the basement and have installed a supply branch with diffuser in the ceiling. That is one 6" branch off of the main supply to a 500 sq ft rec area. I would like to add a second and also a cold air...
Install cold air return in a finished basement where walls are done
[ 2 Answers ]
I finished 2/3 of my basement, ending up with a 26 x 34 finished area. We have always had a fairly comfortable area and insulated the poured walls with 1 1/2 blue board, and carpeted the floor. I did install 2 heat flows off the trunk and never gave much attention to a cold air return. Now the room...
New cold air return install in renovated basement
[ 0 Answers ]
How far from the furnace should I install a cold air return in my newly renovated basement? Another question: I just installed a new high efficient furnace with a fresh intake on it from outside, in an existing house. Any need to invest in an HRV air exchanger with an additional fresh air intake... View more questions Search
|