 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane Verticle Heat Pump System Question
I have a vertical trane heat pump setup in my apartment. The unit is wired to a digital wired temperature sensor. When I set the temperature sensor to auto and put it on 68-71, the unit shuts down when it reached a temperature of only 72. Does anyone have an idea of what the problem could be? Thanks in advance.
|
||||
Check out some similar questions!
I have a Trane XL1200 Heat Pump that was disconnected and reconnected due to some foundation work this past July. The contractor picked the company to do this work and the tech miss-wired the low voltage line between the Heat Pump and the Air Handler. The cooling function worked fine and we did not...
How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.
Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.
1990 Heater: Trane XL80 w\ original Trane A\C - heat pump 1990 Thermostat: Trane Weathertron Last year, problem began occurring whereby our heater will not lite unless we switch to 'emergency heat'. Then, the heater unit will ignite and the heat pump eventually shuts off, making our system...
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
