Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
5hp briggs and stratton
[ 2 Answers ]
I have a 5hp briggs and stratton model 130212 and I took all the hard ware off the gas tank to have it repainted, and I forgot where it all went. There is this little bridge looking thing with a place for a bolt in the middle but I'm not sure where it goes. If anyone can find a diagram or knows...
6.5hp Briggs and Stratton will not start. I have spark and gas but no compression.
[ 6 Answers ]
This engine has a compression release and I think it is stuck open. I am not familiar with the release mechanism, a separate valve? Any help appreciated.
5hp briggs and stratton
[ 2 Answers ]
I rebuilt the carb and checked to make sure that it was getting gas flow, I have checked and rechecked carb for dirt, etc.. Could there be carbon build up inside the mower keeping it from starting
18.5hp briggs and stratton trouble
[ 1 Answers ]
I have a troy built tractor, I recently purchased it non running "used" after removing and replacing the inline fuel filter I was able to get it to fire . Although it was running rough I believe that it was firing on one side only as It would not accelerate and would die out after about 30 seconds....
Briggs and stratton 12.5hp
[ 1 Answers ]
I just got a 28v707 12.5 hp rider. It doesn't start but turns over almost excessively easily. I have a weak spark but no attempt to catch even with starter fluid. No seen problems with the flywheel or the key. View more questions Search
|