Ask Experts Questions for FREE Help !
Ask
    Matey's Avatar
    Matey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2012, 07:31 PM
    Honda prelude 92 won't start
    Hi I have a honda prelude 92 vtec and when I turn my ignition on it won't start all my lights on the dash are showing up and yes there is gas and my car and when it sounds like its going to start it doesn't. Please Help Anyone
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 1, 2012, 07:13 AM
    . Check for codes.

    . Remove and have the alternator tested.

    . Check all under hood and under dash fuses with a test light or multimeter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Prelude won't start.. compression [ 0 Answers ]

I have an 89 prelude that stop running after my brother drove back to my house tunred off then came in and when he tried to leave would it would not start. We have changed sparked plugs and distributor and had a mobile mechanic look at it. We have spark it tries to start. Did a compression test and...

92 Honda prelude won't start [ 1 Answers ]

I was driving to work and my prelude bogged out and died. The windows wouldn't roll down and non of the dash lights worked. The dash lights came on for a bit and it started and ran for a bit but then stopped again and I had to tow it. It will not run at all now it cranks but doesn't start and the...

1992 Honda Prelude won't start [ 2 Answers ]

I was driving about 45-50 MPH and my car stopped running. It will crank but will not start. I thought it was the timing belt but, it is still in tact.

Honda prelude non start [ 2 Answers ]

Honda prelude 1991 vtec , engine check light goes out after 2 seconds , no spark to plugs

Honda prelude won't start [ 1 Answers ]

I have a 1988 honda prelude it turns over but won't start changed the ecm new plugs cap roter and wires the main relay seems to be working it clicks when I turn the key to the on position the check engine light is not showing any codes it just stay on please help I am lost

View more questions Search