Ask Experts Questions for FREE Help !
Ask
    nikkita's Avatar
    nikkita Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 28, 2012, 07:13 AM
    Water pump not working
    Woke up this a.m. to no water. All breakers are on. Went to prime it and nothing happens. The gauge doesn't movr, pump not kicking on and when I knocked on pump.. it sounded empty. Is it my well because our pump is only 2 yrs old
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 28, 2012, 07:56 AM
    Ya got to be more specific. Is the pump running but not pumping? Does it hold prime or does the prim drain away? Give me something to work with here. Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Well water pump not working [ 0 Answers ]

Well water pump is not delivering water. The pressure gauge reads 15psi. I can not make out if the pump is running or now (I guess because it is a submersible pump... 4" Goulds ). Water was flowing last night but when we woke up this morning we found very low pressure and soon no water. It is...

Water well pump not working [ 2 Answers ]

This morning while conducting laundry the water stopped running. I had went down stairs and had replaced the pressure switch but this is still not the problem... the pressure switch when in the closed position sparks but the pump does not turn on... whats wrong?

Water well pump not working [ 4 Answers ]

It was around 19 degrees here in GA this AM. I left my water run last night so it would not freze up. This AM all was well untile about 9:30 then the well pump stopped working. It still had about 20lbs of pressure but will not kick back in. Could it be from the cold weather. Thanks for any...

Water Pump not working [ 2 Answers ]

We had cold weather and we lost our water. It still hasn't come back. We replaced a blown fuse but it still doesn't work. Does the pump come on even if it needs to be primed? It makes no sounds. Does this mean that the motor is burned out? Or do I just need to prime it? Thank you.

View more questions Search