Ask Experts Questions for FREE Help !
Ask
    jrodzak's Avatar
    jrodzak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 27, 2012, 01:01 PM
    I have a genie opener.
    I lost the original one in an accident and both replacements I bought do not work. I bought the 2 better ones at Home Depot as the only other one they had was for pre-1995 doors. The model unit number for what I have is 60L-07. It was installed aroung 2007.
    What do I need to get
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
    		  
    #2

    Aug 27, 2012, 01:20 PM
    Quote Originally Posted by jrodzak View Post
    i lost the original one in an accident and both replacements I bought do not work. I bought the 2 better ones at Home Depot as the only other one they had was for pre-1995 doors. The model unit number for what i have is 60L-07. It was installed aroung 2007.
    What do I need to get

    Have you looked on line?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Aug 27, 2012, 02:18 PM
    See this web site.
    Genie Garage Door Openers-Buy Genuine Genie Garage Door Opener Replacement Parts Online

    Scroll down to the paragraph

    "How do I determine what garage door opener transmitter to buy?"

    Presumably you have program the new remotes to match your opener.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Genie sp99 garage door opener [ 3 Answers ]

My problem with the old Genie SP99 garage door opener is when operating the unit, the large plastic spocket with chain sprocket atop both mounted on same shaft rises up away from the top of the opener and the stop "flags" on the chain miss the limit switched. The shaft/plastic gear/sprocket all...

Genie 88 garage door opener sensors [ 0 Answers ]

My garage door does not close. We found that one of the spring loded wire of sensor is missing. I like to know what part I have to order for it? Do they have whole sensor or just the spring loaded wire available?

Genie Door Opener Open Problems [ 1 Answers ]

Genie door opener closes door fine. Problem with opening door. It stops 1/2 way then creeps up the rest of the way. Why is it creeping?

Old Genie Garage Door Opener - Gear and Sprocket [ 4 Answers ]

We have an old genie model SP99 garage door opener. The motor stills works, the plastic gear still turns but the door will not open or close without assistance. Could the chain sprocket 'slip' when the gear is turning? When giving assistance the chain does move down the track like normal to it's...

Genie 88 garage door opener [ 0 Answers ]

I have the same problem as everybody else,the door opens about 6 in. and returns right back. After reading all the forum , I performed eveything suggested with no success. What is the problem? Can it be the starter module? Or what else? Thanks Gardoor

View more questions Search