 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas in the Oil
I've got a 1988 Harley Sportster XLH 1200. I'm getting gas in the oil. I thought it might be the piston rings but it has plenty of compression. It starts very easy. I was told that it could be the carburator. I can't see anything wrong with it but I'm not sure how to really know for sure. It's a rev-tech carb. Could it be as simple as the carburator or is it something more serious (i.e. valves, piston rings, or carburator)? My email is [email protected]
|
||||
Check out some similar questions!
Gas or Gas & Oil for Homelite Trim N' Edge Number UT20022A Doe it only take Gas or does it take Gas & Oil for Homelite Trim N' Edge? Grandfather gave it to my son without the manual. Thanks
I have a 12 hp. Briggs & stratton on a craftsman riding lawn mower, and the gas is getting into the oil, every time I check the oil, I get more gas on the dipstick than oil, does anybody have any suggestions on what I may be able to do to fix this problem, or what will cause this, and how to adjust?
I accidentally put all gas in my blower and ran it for about 5 minutes until it died on me. How can I fix this problem? Thanks.
I have a 33 year old New Yorker oil boiler that is on it's last legs. I am wondering if I should replace it with an oil boiler or a propane one. Any idea if the KERR GA100 is a good gas boiler?
I think I'm having a major probem - last season my mower stopped working - now, I'm trying to figure out the problem. It's getting fire but when I try to start it with the spark plug in it will not turn over - if I take the plug out then it turns over very easy. I went to change the oil and found...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
