Ask Experts Questions for FREE Help !
Ask
    clintpatterson1's Avatar
    clintpatterson1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2012, 05:03 PM
    Why is my car miss firing?
    I have a 93 honda civic ex 2 door and its acting like my plugs are fouled but I changed all my plugs, wires, cap and rotor and its still missing any ideas?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 25, 2012, 05:20 PM
    Replace the Ignition Control Module (ICM) and coil inside the distributor. Apply silicone heat transfer compound to the back of the new ICM.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1997 GMC Sierra 350 5.7L - Replaced head gasket, engine miss-firing and won't start [ 5 Answers ]

A buddy of mine (a mechanic) and I tore apart my 350 to replace the head gaskets. We were real precise with diagramming on break down and reconnecting on build. However, we are having timing trouble and the engine won't start. Notes: Valves adjusted Spark plug wire replaced (spark...

What would cause my 99 Taurus to miss, and then run great, miss etc etc? [ 4 Answers ]

It will idle up to about 2000 rpm, runs fine, starts coming down, running good, drop to 700/800 rpm, starts spuddering, does not kill. And I am hearing a loud hiss, like there is a vacume leak, somewhere between the engine and the fire wall.

View more questions Search