480 volt three phase dip tank

glen1525 Posts: 1, Reputation: 1

New Member

Aug 22, 2012, 02:18 PM

480 volt three phase dip tank

I have a 480 volt three phase dip tank, and it has two 24 kw heaters in parallel. What amps do I need to run to it?

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Aug 22, 2012, 03:04 PM

An electrician.

Add your answer here.

Check out some similar questions!

What is the primary amprage of a 15 kva 480 volt 3 phase transformer? [ 1 Answers ]

What is the primary amprage of a 3 phase 15 KVA 480 volt transformer

I have 480 volt, three phase available. Can I pull 240 volt, single phase off this ? [ 1 Answers ]

Have available 3 phase, 3 leads plus a ground. Need to run 240 volt, single phase connection off the 3 phase. Is this possible without a step down transformer?

Can I use a residential water heater if I have only 277/480 volt 3 phase? [ 5 Answers ]

I am needing to install a residential water heater and I only have 277/480 volt 3 phase available. Are there residential water heaters that would be compatible with the voltage? I have found those that have a 240 volt system with a 277 volt element would this work with 277 3 phase?

Advantages of a 480/277 3 phase Volt system over a 120/240 [ 2 Answers ]

I have customer that needs to upgrade his service from 800Amps to 1200Amps. He currently has a 120/240V 3 phase system and a 120/240V System With 2 separate Meters. I am advising that he upgrade and go to a 1200Amp 480V 3 phase system and transform down for existing loads. Will he save any costs on...