Ask Experts Questions for FREE Help !
Ask
    dmccrellias's Avatar
    dmccrellias Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2012, 12:55 PM
    Coleman presidential 7680 series 856
    I have coleman presidential mod # 7680 series 856 I can not get it to start I replaced the blower motor and the breaker but it still will not start. Any suggestions would be greatly appreciated.

Check out some similar questions!

Coleman Presidential Gas Furnace Series 7900 blower [ 3 Answers ]

I recently purchased a mobile home and know nothing about maintaining it. The weather is turning cold and I do not know how to make my furnace work. I turn the thermostat to heat and set the temp but nothing happens. I checked it and the pilot light is lite and stays on, but, the furnace does...

Coleman Model 7966-856 won't ignite! [ 0 Answers ]

Pilot lights fine and control knob is moved to the "ON" position, but when the thermostat is adjusted which should cause the burner to ignite, nothing happens . I do have approx. 25VAC to the valve electrical connections.

Coleman model 7956-856? [ 0 Answers ]

Water is leaking a the bottom of our unit, near the center, by the seam, about a 1/4 from the floor, while the A/C is on... Can't find the drain pipe or the pan to check any water...

Need help troubleshooting a coleman furnace model 7995-856 [ 1 Answers ]

No forced air from registor

Coleman Gas Furnace Model 7956-856 [ 1 Answers ]

I have an old furnace in a mobile home that kicks on and runs, but the blower fan keeps clicking on and off the whole time it runs when heating. What would cause that?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.