 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman riding mower
I bought a used Craftsman riding mower # 917273220 a few weeks ago from a dealer. Since then, I have replaced the drive belt 5 times... it keeps getting chewed up. I have now noticed, that hydraulic fluid is dripping on the belt, and is probably the reason, they keep slipping off and getting chewed up. Where do I start? I don't have the money, to take it back in, and have it worked on... I have to figure this out, myself. Thanks!
|
||||
|
||||
|
Well I would certainly attempt to return it as defective. The only place for hydraulic fluid to leak from would be the trans axel and a replacement does not appear to be available and if you find one it will certainly be expensive.
As for belts are you using the original equipment? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a craftsman riding mower 26 hp b&s with a 48" deck. It's been running fine till yesterday went to mower and as soon as I turn on the mower deck it shuts off. It starts right back up when I try it again off it goes. It seems like it has something to do with the clutch am I right? Thanks ...
What is the tension pulley? Gram, 67, wants to know? Replacing belt myself hopefully. Craftsman riding mower, lower belt came off. Have lowered deck, belt is loose, not sure where it goes, studying manual but how engage, disengage tension pulley?
I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.
I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower
My belt broke that operates the mower blades... How do I remove the cutting deck and replace the belt?
View more questions Search
|
