 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
ask electrical questions free
I have recently installed 24 of 4 watt LED Lights in a holiday house. They are powered through a 5Kw inverter via 12 x 225Amp deep cycle batteries and 6 x 170 Watt solar panels.
Most switches are double switches , to 2 separate lights. When certain lights are turned on , others not turned on , flash intermitently and this keeps happening. I have to turn off at the mains board , or else there are still lights that flash even when all the switches are off. Someone mentioned , voltage stabilisers / flicker controls ? Please help |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can you have a 480 volt primary transformer feed in the same pipe with 120 volt Branch circuits. Can you share a under ground vault with 480 volts and 120 volts arriving and leaving in separate conduits.
Why does an afci trip when the neutrals of two different afci circuits are tied together in a switchbox?
My condo has the old style pull out main switch 1972 when this condos were built.It is located by the elctircal meter outside on the side of the house. Can I just pull it sraight out with out any gloves or protective wear. I am having problem with my lights blinking on and off and think their may...
there are 3 questions here. question 1. I am replacing a older newtone bathroom ventilation fan with a panasonic fan same 110 cfm. My question is the old newtone fan just pluged in for installation and the new one is for hard wiring. Can a plug be put on the new panasonic fan and just plug it...
Im trying to hook up a my Q light switch from chamberlain in my house. I took the old light switch off and found 1 red wire 1 black wire 3 white wire that are hooked togther with a cap guessing that's neutral. 2 greenish black wire and one bare copper wire. The swich that I'm trying to hook up...
View more questions Search
|
