Ask Experts Questions for FREE Help !
Ask
    Brandyri2012's Avatar
    Brandyri2012 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2012, 04:27 AM
    John Deere L130
    Drive belt is not tight enough toove the mower either forward or back
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 13, 2012, 05:34 PM
    Hi,
    Check the two idlers and the spring that moves them. Make sure that something is not jamming the movement of the plate to which they attach.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

L130 john deere [ 1 Answers ]

Always smokes a little when it cranks, but now smokes a lot for a couple of minutes . Then blue smoke clears up. Runs great. Kohler has plenty of power. What's the problem valve seals, breather or what

John Deere L130 [ 9 Answers ]

My John Deere L130 will start but only run for a second. I can do this several times at full throttle and full choke and it only runs for a second or two. If I retard the throttle to 50% it will run a few seconds longer but that's it. I know this must be a fuel flow issue but the filter liooks...

John Deere L130 [ 0 Answers ]

Does anyone have an electrical diagram and an engine diagram for the L130 Koeler 23 hp?

John Deere L130 [ 3 Answers ]

Subject: John Deere L130 Mower Is there a way to adjust the drive belt on this mower? Not the mowing deck belt but the drive belt. Thanks in advance for any help. Jimmy

John Deere L130 [ 1 Answers ]

Concerning my 3yr. Old John Deere riding mower L130 w/23HP Kohler engine. The pedals that you depress to make it go forward and backwards seem to have lots of slack or looseness in them. My neighbor has the same machine and his has no looseness and respomds to foot movement quickly. Can this be...

View more questions Search