Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3-prong generator & 4-prong power cord
[ 11 Answers ]
My 5kw Coleman Powermate generator has two 110v receptacles and two 220v receptacles. Both of the 220v receptacles are the 3-prong blade type. My six circuit Reliance ProTran transfer switch has the 4 prong female twist lock. Both ends of my 30amp 4-wire cord are twist lock. The end for the...
What type of cord for generator
[ 5 Answers ]
Hi, we have a small Honda em2200 generator. The in-laws gave it to us because they never used it. Two winters ago we had an extended power outage and attempted to use it. First we spent an entire day trying to figure out why it wouldn't start (had to clean out a minuscule air hole with an...
My 220 watt mackie power supply kept on blowing fuses were you plug in the power cord
[ 2 Answers ]
My 220 watt mackie power supply kept on blowing fuses were you plug in the power cord.
I require for a Power Plus 5000 Generator 1 generator under following specifications:
[ 1 Answers ]
I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio
50 Amp Generator Power Cord?
[ 4 Answers ]
I'm having a Tough time finding a 50', and a 25 foot Power cord for a Generator. Generator Has 50 Amp 4 Prong Twist lock, and the Power inlet has 3 prong twist lock with the center pin(California Style). Any Ideas, Local suppliers cannot find. Also have a tough time finding a Square D QOT 3030... View more questions Search
|