Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tub drain center hole too big for strainer screw
[ 5 Answers ]
Hi all. I bought a fancy, "universal" shower drain strainer for my boyfriend's bathtub (which had no strainer). It came with a 1-3/4"-long screw, about 11/64" in diameter (I don't know anything about screw sizes so I held it side-by-side with some drill bits we had and it was the closest match :o )...
Drain hole in tub rusted and too big
[ 5 Answers ]
Hello Plumbing Geniuses, I have a bath tub that looks like it has been leaking for years at the tub drain. Consequently, the hole in the bottom of the tub is rotten and rusted around the edges, and bigger than it should be. The new drain replacement will not fit securely and there could be...
Can you use your power washer as a sand blaster?
[ 4 Answers ]
Can you use your power washer as a sand blaster?
Drain pipe for washer backing up once washer starts to empty what could be causing
[ 4 Answers ]
What couild be causing the drain pipe fro washer to back up and spill all over floor behind washer
Covert washer drain to tub drain?
[ 3 Answers ]
My downstairs bathroom used to also be the laundry room, but I have relocated the laundry room. I am looking at adding either a tub or a shower unit to the bathroom. Can I covert the old washer drain into a tub drain? I am trying to avoid digging up concrete. View more questions Search
|