Ask Experts Questions for FREE Help !
Ask
    brianwynne's Avatar
    brianwynne Posts: 8, Reputation: 1
    New Member
     
    #1

    Aug 13, 2012, 02:46 AM
    hvac questions
    can I match up a r22 brynt 2 ton in door coil to a new carrier 2 ton condenser r22 also.. I think the indoor coil is a brynt the model # is 3ckbxa024017aaa... serial # 520x53255
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Aug 13, 2012, 02:53 AM
    Both R-22 so it should not be a problem. If it is a flow rater/piston metering device use the number size for the outside unit if expansion valve then get one for 2 to 2 1/2 ton R-22.
    brianwynne's Avatar
    brianwynne Posts: 8, Reputation: 1
    New Member
     
    #3

    Aug 13, 2012, 02:59 AM
    Hvac questions free
    Where do I hook up the 24 volt wiring to my residential condensate pump coil

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hvac questions free [ 1 Answers ]

I have a split system A/C. My unit outside has frost on the pipe and will not turn on. How can I fix this problem? Is my air conditioner ruined?

r22a hvac questions [ 0 Answers ]

I removed the r22 from a system and charged with three 8 oz cans of r22a. The evaporator coils froze. I removed some of the r22a and it seemed to get better, but the lower side of the coils is still freezing. The system is a trane and the low side is 150 high side 300 I charged at 76 degrees and...

HVAC technician questions'; [ 3 Answers ]

I am currently enrolled in a 45 week HVAC program at Algonquin College. I am just wondering about writing my TSSA, is there a certain percent I have to graduate with? I believe it is 75% but I am not 100% sure? Also, I am considering getting into Commercial, do you guys recommend this? Or is...

Hvac questions [ 9 Answers ]

I have an old airease furnace and it will not come on. I changed the circuit board and the transformer, what could cause this?


View more questions Search