Ask Experts Questions for FREE Help !
Ask
    jacktgolf's Avatar
    jacktgolf Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 11, 2012, 12:25 PM
    Bolen 15 hp rideon belt problem?
    Bolen 15 hp engine runs fine. When in gear I can get it to run in 4th, maybe 5 sometimees, 1-2-3 do not work, sometimes have to jurk it forward to engage. Seems like a belt is lose. How easy is it to change it myself. Somewhat handy and can follow directions (not what my wife says). Once going runs fine but inclines gets testy, have to jurk forward to keep going. If I hit the brakes it take a while , again jurking forward, to get going.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 14, 2012, 07:48 AM
    Hi,
    Need some model numbers here; Bolens has been its own company, part of Gardenway and now part of MTD. They have been around longer than most with huge differences depending upon age.
    Peace,
    Clarke
    jacktgolf's Avatar
    jacktgolf Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 16, 2012, 12:43 PM
    Model 13am662f163
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Aug 26, 2012, 03:47 PM
    Hi,
    I will post a couple of images from the IPL. The top image has the speed control linkage and adjustment #33 and #62. They attaché to the pedal and allow the variable speed pulley bracket to rotate. Also, note springs #58 and #59 which balance the action of the bracket. First guess ia that one of the springs broke or fell off. They attach to opposite sides of the bracket and to notches in the rear frame.
    In the second parts #21 and #28 are the neutral adjustment, and the bracket is #4. These come from the IPL which is available for your model online, #769-00642A. It can be found by typing in your model number in the appropriate line and a 1 in the serail number line at:
    PDF Manual Web Archive
    Peace,
    Clarke
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a gxv390-389 rideon honda motor [ 1 Answers ]

It starts when is cold but when it gets hot it loses it spark and will not start

Rideon mower no power [ 1 Answers ]

Hi, Have a rover ranger xc.. I am finding that it lacks power on a slight rise. No change in power , just slows and stops having to reduce gear to 1 and even then it slows to a stop then having to get off and push to get it going again.! Any suggestion on where to start much app.

Replacing the belt on a bolen 15 hp 36 [ 1 Answers ]

Replacing the belt on a bolen 15 hp 36

MTD rideon mower won't crank [ 1 Answers ]

I have an MTD rideon mower that has sat for about a year and a half I have replaced the battery, selonoid and starter. After relacing battery it crank once and now won't do anything and the crankshaft is really tight is there anything I can do to get th crankshaft to loosen up

Belt replacement problem [ 2 Answers ]

I finally got my deck straightened out but the replacement belt I got from ACE hardware seems too long (original # 754-0371A). They gave me a belt numbered 954-0371A and told me it was the same belt. Now I have to drop the deck to change the new belt out with the correct one. My question is did...


View more questions Search