Ask Experts Questions for FREE Help !
Ask
    mariofanelli's Avatar
    mariofanelli Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 10, 2012, 05:02 PM
    I istalled 3/4 " PVC in cement. Mortar got into the PVC. How do I get it out?
    I installed 3/4" PVC in cement for load levellers. Mortar got into the PVC when they were building the structure. The Mortar hardened int the 90 degree fittings. How do I get it out? Is there some type of acid or something?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 10, 2012, 06:01 PM
    Muriatic acid will dissolve the calcium oxide and then flush with water. If you can get to it, carefully drill some holes in the concrete. If this is a lot of concrete, it will take time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

CPVC cement on PVC [ 1 Answers ]

Can I use CPVC cement on PCV pipe?

I used pvc cement instead of all purpose cement [ 1 Answers ]

I replaced some old pipes with cpvc and then realized that the cement was not all purpose, just pvc. Will it hold?

Pvc cement [ 4 Answers ]

How do I remove a 3 inch section of pvc from a 3 inch to 1 inch reducer that I solvent welded together

Pvc tile for use on cement [ 1 Answers ]

Is pvc the best tile to use on cement basement floor?

Now What--PVC cement on ABS [ 1 Answers ]

Used PVC cement on black (ABS?) pipe on a trailer while gluing in a Drain Master flange. Cement is P-8 Nutone PVC Cement (ASTM D-2564). Joint looked good put didn't stress it. Will it hold? If not, what now? (just another example of gaining 'experience' by doing stupid things--great fun...

View more questions Search