Ask Experts Questions for FREE Help !
Ask
    roviper's Avatar
    roviper Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2012, 07:08 AM
    My Troy-Bilt Super Bronco Mod. 60TG
    My Troy-Bilt Super Bronco Mod. 60TG stopped running. I found and replace a blown 20 amp fuse. It now starts etc. but when I went to drive it, all of a sudden, I have play in the drive pedal like it's not engaging something. What might that be?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 12, 2012, 09:23 PM
    Hi,
    In the not so distant past, I could probably find it by those numbers, but no more. I would require the actual full model number now.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt Super Bronco 13AX60TG766 [ 2 Answers ]

Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...

Troy bilt super bronco [ 1 Answers ]

On my mower the steering wheel just keeps turning and the wheels don't turn. From reading other posts it looks like I may need to replace the hex flange bearing, but I cannot get the stupid nut and pinion gear off to do so.. please and help is greatly appreciated

Troy-bilt Super Bronco will not start [ 0 Answers ]

I have a model 13AT609G766 Super Bronco with a 21.0hpv twin it will not start, I had it running and when I pushed the lever to start the mower blades it died now it won't start. Can anyone help me, it will start if I spray starting fluid on the air filter but it dies after it burns off the starting...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

Troy Bilt Super Bronco main drive [ 1 Answers ]

I have a Troy Bilt Super Bronco 42" deck rider, It has the veri-drive I believe it is called. Yesterday while mowing I had the drive pedal engaged and the mower just stopped and it started smoking from underneath the mower and wouldn't move in forward or reverse. It will go into gear(forw. And Rev)...

View more questions Search