Ask Experts Questions for FREE Help !
Ask
    buchfamily's Avatar
    buchfamily Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2012, 09:08 AM
    Kenmore ultrawash quietguard 4: cleaning
    Wanting to clean debris caught in filter or other partss, Unable to remove center plastic (grey) screw at bottom of assemmbly, it just keeps turning. Any suggestuions?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 8, 2012, 06:49 AM
    See if these help: https://dl.dropbox.com/u/8010163/Dis...ol-Kenmore.zip
    The screw may be stripped, or the piece it screws into is broken. The latter sounds more likely. You may have to replace the whole assembly, and next time put some anti-seize compound on the screw.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore ultrawash quietguard 3, troubleshooting? [ 0 Answers ]

Help! I have a kenmore Ultrawash quietguard 3 that will not turn on at all! It was working fine last night! I have tried the heated-dry sequence code... and have reset the breaker... nothing has yet worked!

How to reset a kenmore ultrawash quietguard 4 smartwash [ 0 Answers ]

I need the code to reset an ultrawash guietguard 4 smart wash model number 665.16533200. I have seen the codes on line for the other quietguards but I don't have a heated dry button. This dishwasher is about 7 yrs old. Can anyone help?

Kenmore ultrawash quietguard stuck on wash [ 0 Answers ]

Hello, I have a kenmore ultrawash quietguard standard dishwasher that was just used for the first time and it won't dry. It stays stuck on the wash cycle. Any help?

View more questions Search