Ask Experts Questions for FREE Help !
Ask
    toohot's Avatar
    toohot Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 7, 2012, 05:09 PM
    Ck30-1a - reversed polarity?
    My unit quit blowing cold air, checked the outside unit and it was sucking air in from the top of the unit instead of blowing it out. Shut it off for the night to give it a rest and the next morning it would not operate at all. Called a repair company who told me I need a motor, capacitor, resistor and fan blades without seeing the unit and they could not explain the reversed air flow. Any ideas?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Aug 7, 2012, 05:39 PM
    Time for you to call a different company and this time get a on site inspection and real estimate other wise you are just spinning your wheels.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Aug 7, 2012, 05:40 PM
    If they told you that you need all of that over the phone, and without seeing the unit, I would suggest calling a different company. I have seen reverse rotation of condenser fan motor due to only a bad capacitor, (not common, but does happen). I have also seen this caused by a bad condenser fan motor. Of course, when you replace the motor you should replace the capacitor, just a rule of thumb (and caps are cheap, usually between five and thirty dollars). Fact is, you need to contact a company that will come out and trouble shoot the system, and only replace the parts that need to be replaced, and do the work that needs to be done to make the system operate correctly. I have been called to replace a complete central air system, because they had someone else come in and tell them that they needed a new system because their compressor was "shot". When I showed up at the home to calculate the new system, I found that the dual capacitor in the condenser unit was the only thing wrong with the whole system. Long story short. For under a hundred bucks I had their old system up and running just like it had for years and years, and saved them a few thousand. I hope you can find a tech that is in it for helping people, not making a killing off people. Now, don't get me wrong. You may have a major problem on your hands, but most likely its not a major issue, but may still cost you a pretty penny. I hope that it is a simple, cost effective fix. It really all comes down to hiring a reputable company to check things out. Good luck, and please do let me know the outcome.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #4

    Aug 7, 2012, 05:46 PM
    Ha, you beat me, 1000, pretty much what I was trying to say in my mini novel, lol.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Reversed polarity [ 3 Answers ]

Hello forum my Carrier 58 PAV control broad flashing "reversed polarity" I have read that I need to switch wires but I really don't know wiring. Any help would be greatly appreciated. I purchased a multimeter yesterday but know very little about it. Thanks

What is reversed polarity [ 1 Answers ]

What is reversed polarity

Reversed polarity [ 1 Answers ]

What exactly is reversed in reversed polarity 1) are the hot and nuetral wired forwards/ 2) are the ground and nuetral wireed backwards?

Reversed polarity [ 6 Answers ]

Is reversed polarity when the hot and neutral are wired backwards

Reversed polarity [ 3 Answers ]

What does reversed polarity mean a. the hot and neutral are wired forwards b. the ground and neutral are wired backwards c. the hot and neutral are wired backwards


View more questions Search