Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet tank has new ballcock assembly, 2 months later makes hissing noise
[ 7 Answers ]
Two months ago my toilet suddenly stopped flushing. I replaced the old ballcock and float assemply and water fill tube and it worked fine. Two months later it now makes a hissing noise that started today. I checked the flapper, it's OK, I checked the fill line, it's OK. There is not any water...
Refill of toilet
[ 1 Answers ]
My toilet takes a really long time (5 minutes) to refill. I've tried lowering the tank valve(?) with no change and moving the refill tube to fill just the tank but not much water fills the bowl, what am I missing?
Need to change ballcock in toilet cistern
[ 11 Answers ]
How do I do this - need to do it because existing ballcock is covered in limescale and toilet flushing very slowly
Toilet will not refill
[ 9 Answers ]
When you flush the toilet, the tank will not refill. Do we need to replace the part that is in there?
Toilet ballcock: problems adjusting arm/ball float
[ 7 Answers ]
Hi everyone, After I flush my toilet, the water starts filling the tank, but goes past the desired fill line and all the way up to the overflow tube, making the toilet run constantly. After reading one of speedball's old replies, I tested the ballcock arm. I am able to lift the ball float arm... View more questions Search
|