Ask Experts Questions for FREE Help !
Ask
    Bryan leach's Avatar
    Bryan leach Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Aug 4, 2012, 05:06 PM
    Hardwire woods 40a timer switch
    My wire has black, white and a ground. Terminals are timer, timer, nc,no, com. How do I wire?
    mike 165278's Avatar
    mike 165278 Posts: 168, Reputation: 7
    Junior Member
    		  
    #2

    Aug 4, 2012, 05:30 PM
    Model #? What are you wiring to do?
    Bryan leach's Avatar
    Bryan leach Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Aug 4, 2012, 05:50 PM
    Putting in timer switch ( woods mod. No. 59401) for pool pump
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Aug 6, 2012, 10:11 AM
    Here is the manual:

    http://waterheatertimer.org/pdf/Wood...ith-wiring.pdf
    Bryan leach's Avatar
    Bryan leach Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Aug 7, 2012, 08:30 AM
    I have the manual. I am not sure how to read it. Does it take a jumper wire from timer to timer? I would like for someone to tell me what wires go to what terminals. Thanks.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #6

    Aug 7, 2012, 09:49 AM
    You only mention three wires. I would expect six, three 120 volt input and 3 -120 volt load to pump

    All grounds splice together and connect to any green screw on timer.


    Black Line in connects to first Timer terminal, and then to Com.

    White input connect to second Timer Terminal and Load white to pump.

    Black load wire from pump connects to terminal NO.

    This assumes a 120 volt circuit to both timer and pump.
    Bryan leach's Avatar
    Bryan leach Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Aug 7, 2012, 11:44 AM
    Awesome! Just got done hooking it up! Thanks so much for the help!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Woods timer instructions [ 3 Answers ]

How do I programme my woods 1000 watt photoelectric timer?

Woods 1502 timer [ 1 Answers ]

How do I program a Woods 1502 electrical timer

Woods TD1000 Timer [ 1 Answers ]

Can someone tell me the difference between the "Auto" and "Manual" mode. I'm not sure what to set it at.

Woods timer 1600 [ 1 Answers ]

Programming woods timer

Remote Control Ceiling Fan to Hardwire Switch [ 5 Answers ]

Hi ~ I just bought a Harbor Breeze 52” Avian Ceiling Fan (Model #75849) from Lowe's. Unfortunately, this model comes with a remote control function and I need to hardwire it. The sales representative convinced me that all I need to do is to throw away the ceiling fan remote control and receiver...

View more questions Search