 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have an old Magic Chef gas furnace in my garage. Gas is connected, but wiring for fan and thermostat are a question. 55K BTU, 12 amp blower. Need to know what wires to connect to thermostat. Also, there are three wires exiting furnace. I know which ones power the 110v blower, but there is a...
I have an old Magic Chef A/C Furnace combination unit outside. It is green and the only identifiable marking are ANS- Z21.47. Do you have a wiring schematic and trouble shooting manual for it? My email address is [email protected]
Trying to replace the fan motor 1/2 hp 115 v the fan combo center is honey well 8003 I believe, I try to replace it but end up burning the new motor it all came on the 4x4 metal box next to the transformer and relay I may have cross wire the wrong way the service box switch wires were connected but...
Can't seem to wire this thing. Need a wiring diagram for the MC Model G6A756 Have a new Fan Center Honeywell R8239 A 1052? ANy help?
The copper pipes are hot, the motor is running, but there isn't heat coming upstairs. I believe the wires to the zone valves are either disconnected or misconnected. It is and MAerican Standard unit that is at least 40 years old. Thank you so much!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
