John deer l100 clicking but not starting

Daniel Cortez Posts: 1, Reputation: 1

New Member

Jul 24, 2012, 11:20 AM

John deer l100 clicking but not starting

Why is my L100 john deer mower is clicking when I turn the key but not starting?

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Aug 2, 2012, 03:11 PM

Hi,
Bad solenoid, probably.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

Troubleshootong john deer l100 series? [ 1 Answers ]

John Deere L100 series 48 inch deck. Was hard to start, but finally kicked in. Went about 30 feet then quit (as if no fuel). Fuel level okay, battery charged. Changed fuel filter, seems to be moving fuel to carb. Does not seem to be firing however. Any thoughts?. Thanks

John Deere L100 [ 0 Answers ]

I had some starting problems. I took off the carb and throttle linkage but I forgot how the linkage gets hookd up. I know where the two rods go and the one spring that is on the rod. But where does the other on get hooked up?

John Deere L100 won't move after starting [ 1 Answers ]

Engine will start, but will not move

I have a John Deer L100 with an Intek 17hp OHV that won't start. [ 1 Answers ]

I have power, fuel but no spark won't fire could the spark plug be the problem or is it the silinoid and if it is what is the gap distance between it and the flywheel. Worked on it till 2 AM the other night trying to get it running please help!

John Deere L110 Clicking sound on start - new solenoid, still clicking! [ 1 Answers ]

Hi all, I cut my lawn, engine was running for about 2 hours. Stopped at neighbors house, cold beer, go to restart, just a clicking sound. Thought battery was dead, did a quick check, good voltage, hooked it up to a charger, good amps. Still clicking. I figure it's the solenoid, picked one up...