Ask Experts Questions for FREE Help !
Ask
    signal2007's Avatar
    signal2007 Posts: 83, Reputation: 1
    Junior Member
    		  
    #1

    Mar 13, 2007, 09:40 AM
    Switch& memory
    How is possible that memory of switch is cleaned?
    Lowtax4eva's Avatar
    Lowtax4eva Posts: 2,467, Reputation: 190
    Ultra Member
    		  
    #2

    Mar 13, 2007, 10:10 AM
    Unplug it, it doesn't have a hard drive, then plug it back in.
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #3

    Mar 13, 2007, 10:25 AM
    Don't forget to make sure you use a static cleaner as this will make sure its completely clean ;)

    Hot soapy water works a treat as well.
    signal2007's Avatar
    signal2007 Posts: 83, Reputation: 1
    Junior Member
    		  
    #4

    Mar 13, 2007, 12:32 PM
    Quote Originally Posted by Curlyben
    Don't forget to make sure you use a static cleaner as this will make sure its completely clean ;)

    Hot soapy water works a treat as well.
    Hi Curlyben: where is Rickj? Is he OK?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3 Way Switch Location & Stairs [ 1 Answers ]

There is a three way switch at the bottom of a 15 step staircase. I'm sure this location is okay. However, the other 3 way switch is located in a hallway at the top of the stairs approximately 4' to the left of the door. I looked at 210.70(A)(2)(c) and am wondering if this location is...

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

GFCI & Switch [ 1 Answers ]

Can a GFCI be wired to run of a switch?

Lighted Switch & Open Neutral [ 2 Answers ]

I am currently attempting to use a lighted rocker switch to control a split receptacle. The wiring looks right but when I power up and test the outlet, it shows an open neutral (light on tester is just barely on) when the switch is turned off. In the on position everything test out correct. ...

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search