Ask Experts Questions for FREE Help !
Ask
    frankspiano's Avatar
    frankspiano Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2012, 04:51 PM
    I Replaced Thermister ; Dryer still won't run...
    The Estate Dryer was working fine.. then just shut of.. I replaced the 20 dollar therister.. however it still won't start... no lint... exhaust vent clean and clear... Timer?? Next replacement?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 30, 2012, 01:40 PM
    How did you test the thermistor? If you are just replacing parts without testing first you will never get it fixed. You may have only needed to clean it, or clean it and replace the safety that is open. You will have to remove the air ducts to clean them, like the filter holder, etc. Any one you miss will cause a restriction and another safety will blow. Here are some manuals: https://dl.dropbox.com/u/8010163/Whirlpool%20Dryers.zip
    https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf
    Make sure to get a good digital meter and test the parts and compare values with chart.
    frankspiano's Avatar
    frankspiano Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 31, 2012, 02:13 PM
    Thanks a Bunch... Nice to get help... Thanks for answering... FS
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I replaced my thermalcoupler and my pilot light won't stay lite why? [ 2 Answers ]

I couldn't get my pilot light to stay lite so I replaced the thermocouple and it still won't stay lite??

1993 toyota camry starter replaced still won't turn over [ 0 Answers ]

My 1993 toyota camry has a brand new starter and when I go to turn the key nothing happens it won't even turn over. Any one know what it could be?

1993 toyota camry starter replaced still won't start [ 0 Answers ]

I just changed the starter in my 1993 toyota camry and it still won't start??

Motorcycle help... Suzuki clutch replaced, now won't start [ 3 Answers ]

Hey all, I'm having a problem, big 1! I replaced my clutch lever on my Suzuki GSXR 750 R, and now the bike won't start. I tok the battery in to a shop and they said No WAY, it was the battery! Please, please help, my only transportation at this time! Thank you much! Jeremy

My problem is for whirlpool gold dryer ,I change the thermal fuse,thermister fuse [ 0 Answers ]

I have whirlpool gold dryer 10 years old all lights are on but when push start it only clicks ,I change thermal fuse ,and thermister fuse CHECK DOOR SWITCH still clicks is it the main board if any suggestion will be appreciate thank you

View more questions Search