 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why does my heat pump make clunking noises
Lately my heat pump will come on and run smooth for maybe ten minutes then it will sound like its klunking and making other noises. I then turn it off and wait ten minutes and turn it back on and it seems to run fine until the next day.
|
||||
Check out some similar questions!
I have been awakened several times in the early morning hours recently by activity in the pumps. The grinder and/or the ejection pump (two separate power cords supply power to each device) operate at times when I wouldn't expect them to run. The basement bath & toilet don't get as much use as the...
I am installing a geothermal radiant floor heating system which includes the following components: Florida Heat Pump 3T WW036 water-to-water heat pump which will use well water as its source. The terminals on the heat pump include C, O, Y, R Honeywell TH5110D1006 Focus Pro non-programmable...
Honeywell digital t-stat for a heat-pump is wired wrong. Only get heat. Here is how it is currently wired: C=black Y=yellow G=green O/B=orange Rc=jumped to R R=red
I have a Day & Night heat pump that is about 20 years old. I've noticed in the past that when it gets cold out (near or below freezing) the unit makes a loud buzzing noise. Actually the noise starts not to loud, but over the course of a minute or two it gets louder. At the loudest point of buzzing,...
My heat pump fan blade sounds like it is hitting chunks of ice and makes a loud noise every 30-60 seconds. There is ice on the outside of the unit. I changed the internal air filter last week. There is an ice/freezing rain storm outside. I have turned the unit off to stop it from damaging itself. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
