Ask Experts Questions for FREE Help !
Ask
    Rick1951's Avatar
    Rick1951 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2012, 06:42 PM
    Automatic transmission linkage problems on 96 ford taurus
    Column shifter does not engage transmission.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 30, 2012, 05:01 AM
    The linkage to the Transmission Range Sensor (TRS), which is located on top of the transmission, may have come loose. Otherwise, you may have to remove the knee bolster, lower the steering column, and repair the shifter mechanism.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where is the shift linkage on a 99 ford taurus [ 1 Answers ]

My ford taurus won't shift into any gears.. Wha could be the problem? The shifter just slides and don't lock into any gears..

How do I set the ajustment on my linkage cable on a 1996 ford taurus [ 1 Answers ]

My cable from my steering column shifter broke, I replaced it and now I can only go a little ways and it starts revin out and kicking back in, its like it doesn't know where its suppose to be. We adjusted the cable out under the hood but someone says it should be adjusted inside under the dash. But...

1999 ford taurus transmission problems [ 1 Answers ]

My transmission is making a very loud noise. This morning it would only shift into reverse. I added 1 quart of transmission fluid. It shifts but its still loud. What could be wrong?

My 98 ford taurus automatic transmission won't go into gear, what could be wrong? [ 1 Answers ]

I was driving my 98 taurus, and it just starting reving up. I coasted to the side of the road, and tried shifting the gears. But it does nothing, no reverse, 1st gear, drive or over drive. What could cause this?

View more questions Search