 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Sheet metal that heating element is attached to is cracked and black. Dryer runs cold so I replaced element and it still runs cold. Blower seems to be working also. Could I have cross the wires at the top by mistake on the plug at the top of the element housing or would it now come on at all?
My dryer takes over 2 hrs to dry a load. My hose is not blocked twisted up or too long. The dryer does heat up, but only runs for about 30 then shuts off. I have to restart it about 4 times to get the clothes clean no matter if it's set at more dry or timed dry
My old Roper electric dryer worked fine yesterday and last night. Now this mornign I went to turn it on, and Nothing! No sound.. Nothing? Any ideas? We checked the plugs, vacumed out the dust, still nothing. What else should we be checking? The washer next to it runs fine.
My Roper Stackable Dryer is not getting hot. Do you think this is the heating element? If so where can I pick up a new part and how easy is it to install?
My dryer start on but is not heating up. Can some one give an answer what I need to do. Thank you, evertracy
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
