Ask Experts Questions for FREE Help !
Ask
    JRPickett's Avatar
    JRPickett Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2012, 09:20 AM
    murray riding mower will not go into gear and i replaced the motion belt
    I have a Murray 30505 x 92 riding tractor mower. I put a new motion belt on it and it still real not go forward or in reverse. What else can it be?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 2, 2012, 03:10 PM
    Hi,
    Check the idler(s), belt tension, park brake.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The belt is loose and my riding mower won't drive when in gear [ 2 Answers ]

I have a 6 speed sears craftsman riding mower. I put in gear 1,2 and 3 and the mower won't move. I notice the belt for the pedal was not going into pulley. I moved belt but now not sure what I did. If you release the break pedal the mower stops. If you push the pedal to stop the mower, the...

Murray Riding Mower runs but will not move in any gear [ 9 Answers ]

The other day I was cutting my lawn and I hit a bump and the mower stopped moving even though it was still running. I checked the belts underneath and found that the main drive belt that goes to the drive pulley was off the pulley, I put it back on and it was still loose. I started th machine and...

The belt on a murray riding mower [ 1 Answers ]

I have a 12.5ap 40 inch murray riding mower I think the model number is 289707.. and the belt came off but when I put it back on there is slack in it and it won't engage.. what do I need to look for to do.. thanks

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

View more questions Search