Ask Experts Questions for FREE Help !
Ask
    goodson5's Avatar
    goodson5 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2012, 07:27 PM
    Installing 24VAC transformer 50a50-472
    How do I install a 24VAC transformer on white-rogers 50A50-472 - which terminals do I connect to? Or are there a 24VAC terminals already present? The unit has a humidifer.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 22, 2012, 07:33 PM
    Quote Originally Posted by goodson5 View Post
    How do I install a 24VAC transformer on white-rogers 50A50-472 - which terminals do I connect to? Or are there a 24VAC terminals already present? The unit has a humidifer.
    There is supposed to be a wiring/connection diagram instructions with the control. Follow it OR find the directions on line.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a transformer on a carrier [ 0 Answers ]

I bought a universal transformer and it has different color wires than what I already have coming out of the wire harness

Need a 24vac 1250ma transformer, where can I find one? My timer displays fine w/batt [ 5 Answers ]

I have the RD 900 int. The display stopped working. I put in an alkaline 9v and the display shows fine. I'm suspecting the transformer is bad. It's a model #a5724125-1, part # 872901. 24vac@1250MA. Please advise of your thoughts and/or parts info. Bob ***REMOVED NAME AND PHONE NUMBER*** (TKR) Or...

Installing Honeywell DTH8500 for 24VAC In floor heating [ 7 Answers ]

I am replacing a Danfoss RET-24 thermostat with a Honeywell RTH8500. There were three connections on the old unt: Black wire (connected to slot A: RC/24V) Red wire (connected to slot B: RH/24V) Green (connected to slot 3: ON/W) There is 24VAC between the black and red wires.

Grounding secondary on 24vac transformer [ 14 Answers ]

On a York air handler, I have a 60hz, 240/208 -> 24vac, 40 va transformer. That's a 2 * 120v primary and (2) 24v outputs. On one of the 24v output terminals, there is a split connector that feeds the thermostat (RC) and strangely grounds(?? ) on the firewall, next to the circuit board, inside...

IN NEED OF SERIOUS HELP w/ 24VAC transformer for furnace [ 1 Answers ]

:confused: :confused: :confused: :confused: :confused: :confused: Well, I did a minor remodel for a business and part of that was to change out the thermostat for one that was a little more appealing to the eye. Did that and a few days later they said that the heater has not been working. At...

View more questions Search