Ask Experts Questions for FREE Help !
Ask
    David Potter's Avatar
    David Potter Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 21, 2012, 01:36 PM
    What is "using a snake" to unblock an outside drain
    We have tried strong chemicals to unblock the outside drainage pipe taking water from the bath (having first removed grease and hair from the initial outside vertical section of the pipe) but without success

    It seems the next suiggestion for DIY (leaving calling a plumber as the last resort) unblocking is to "use a snake". What does this entail?
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
     
    #2

    Jul 21, 2012, 01:38 PM
    Quote Originally Posted by David Potter View Post
    We have tried strong chemicals to unblock the outside drainage pipe taking water from the bath (having first removed grease and hair from the initial outside vertical section of the pipe) but without success

    It seems the next suiggestion for DIY (leaving calling a plumber as the last resort) unblocking is to "use a snake". What does this entail?

    It's a flexible auger. I know if you don't know what you're doing you can damage/puncture the pipe.
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #3

    Jul 21, 2012, 02:02 PM
    First most real plumbers will never want you to use "chemicals" most seldom work and if you now have to do other things, those chemicals are in the pipes to get on you and your hands.

    A snake is either a flexable or a solid heavy auger. Some are by hand, some are electric.

    You can rent a electric one at most rental places.
    msdebdardx4's Avatar
    msdebdardx4 Posts: 53, Reputation: 6
    Junior Member
     
    #4

    Jul 21, 2012, 06:17 PM
    Our pipes became clogged, and we hired a plumber, who rent a snake form Lowe's or Home Depot. It is a flexible auger (a long tube) , that they run through the pipes to clean the line of any clogs. Yes it does work
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
     
    #5

    Jul 22, 2012, 05:56 AM
    Quote Originally Posted by msdebdardx4 View Post
    Our pipes became clogged, and we hired a plumber, who rent a snake form Lowe's or Home Depot. It is a flexible auger (a long tube) , that they run through the pipes to clean the line of any clogs. Yes it does work

    My husband somehow managed to push the auger right through the side of the pipe - not only did we pay to rent the auger, we also paid to replace the pipe (including digging it up).

    I'm not sure this is a "do it yourself" project. It is NOT in my house!
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #6

    Jul 22, 2012, 06:16 AM
    I agree with JudyKayTee,

    The best thing would be to call a plumber, to show you the snake machine see the image below, Thanks.

    John
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #7

    Jul 22, 2012, 06:34 AM
    Hey David,
    Let's first find out what your problem is and then we can offer a solution. Where. Exactly is the clog? In the tub or outside at the cleanout to the street? Since 5this is a "do it yourself" site we don't often advise,
    The best thing would be to call a plumber,
    We like to think we can help then OP to do his own repairs. Regards. Tom
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
     
    #8

    Jul 22, 2012, 06:54 AM
    Quote Originally Posted by speedball1 View Post
    Hey David,
    Let's first find out what your problem is and then we can offer a solution. where. exactly is the clog? In the tub or outside at the cleanout to the street? Since 5this is a "do it yourself" site we don't often advise, We like to think we can help then OP to do his own repairs. Regards. Tom

    If that can be done without causing damage -

    On the legal boards we offer "do it yourself" but that isn't always practical.

    In this case the OP didn't know what a "snake" was so I don't know that "do it yourself" is the best option - but we'll find out when he comes back.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #9

    Jul 22, 2012, 07:10 AM
    Hey Judy,
    If they don't know how to use a snake then we'll show them how. That's what "do it yourself is all about.
    My husband somehow managed to push the auger right through the side of the pipe
    Then hubby must have been snaking against the flow which is a no-no. Bad things can happen by snaking against the flow. Cheers, Tom
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
     
    #10

    Jul 22, 2012, 07:38 AM
    Quote Originally Posted by speedball1 View Post
    Hey Judy,
    If they don't know how to use a snake then we'll show them how. That's what "do it yourself is all about. Then hubby must have been snaking against the flow which is a no-no. Bad things can happen by snaking against the flow. Cheers, Tom

    Bad things can happen with that husband, in general -
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #11

    Jul 22, 2012, 09:00 AM
    I would say the snake is a do it yourself, it is very easy if you take your time.

    Things can go wrong, the snake can catch and break off in the pipe. It can break or damage the pipe, but even the experts do that some times.

    There is also a manual snake I have a 100 foot flat metal one, you just push and twist

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Collector's Guild LTD, NY- "original etching" "Pour Roby" Picasso "Star Scene" J Moro [ 0 Answers ]

Both pictures have stickers on the back stating with a "certification seal" that the Picasso is a original etching and the Joan Miro is a lithograph. Moro looks real to me but I can't take the frames off to feel if the paint is real or maybe I don't know what a lithograph should feel like just a...

"Form" placed in "Microsoft Access" can be accessed from a "Button" in "VB.Net" App [ 1 Answers ]

Hi All, Actually, I'm not very well in programming but a task is assigned to me related to .Net. Basically, there is a database in Microsoft Access. I have made forms in it which are based on queries to retrieve required results. I have also made graph of it. Now, I have to merge this...

Bathroom Drain slopes "UPHILL" to Min Drain instead of downhill [ 5 Answers ]

My house was build in 2003. Plumbing is PVC. All three bathroom toilets stop up often. The large drain from one of the upstairs toilets is sloping "uphill" to the main drain under the house. What's the best way for me to correct this? Can I cut away some of the vertical pipe and raise to proper...

Tying 2" drain pipe to perpendicular 3" drain line under slap [ 3 Answers ]

I want to avoid a 90 degree bend under slab. However, I have to reduce from the 2" pipe that drains the WM to the 3" main drain line, and the reducing tee I find has a very small sweep. Do I need to use a reducing combination wye and is there such thing?


View more questions Search