 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have an Intermat T103 pool timer that was installed not long ago but the clock has never run. I'm sure the problem is that it is not wired properly because the two wires for the clock have no voltage across them. I need to know how to properly wire it.
I am replacing my old Intermatic mechanical time clocks with the digital P1352 Timer. It has three separate circuits. It is a 120/240volt unit. The old timers had Line 1, Line 2 and load 1 and Load 2 blocks. The new timer has three separate Line 1 and Load 1 bolcks - NO Line 2 or Load 2 blocks....
I haven't been able to source a distributor or retailer of Intermatic Pool Timer products in Ontario, Canada. I am looking to purchase one over the internet and have it shipped to me and installed by a local qualified electrician, but I don't know which model to purchase. Intermatic has 4...
Can anyone tell me how to wire a freeze detector into a intermatice dual timer control system?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
