Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do we wire remote fan/light so the light is only on a switch?
[ 5 Answers ]
We just bought a Kendal remote control ceiling fan and light for the upper hall. We want the light to work only on a wall switch, so we can turn the light off either upstairs or downstairs. We want the fan to work by remote. How do we wire this?
Need help changing a two wire light switch to a fan and light switch.
[ 3 Answers ]
Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?
3-way double pole switch & light/fan combo
[ 0 Answers ]
I have two ceiling fans/light combos that I have on 3-way switches. One is a single pole 3-way switch and the other is a double pole 3-way switch. My thought was the single pole would turn both the light and fan on at the same time and then I could switch either off/on from the other location with...
Connecting two wires from light kit pull chain switch 2 wire to light kit for fan
[ 6 Answers ]
I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...
Double switch Ceiling fan light installation
[ 11 Answers ]
I have two Aries ceiling fans that I installed, in prewired spots, in my living room in 1998 when I bought the new home. One of the fans is operated by either of two different switches. The other by a single switch. My question concerns the double switch fan. I want to install lights on the... View more questions Search
|