Ask Experts Questions for FREE Help !
Ask
    Moe2012's Avatar
    Moe2012 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 18, 2012, 10:29 AM
    How to match wires after adjusting length of pendant track light
    I am adjusting the length of my Hampton Bay track lights (model 672-940). The directions say to match the wires (hot wire (black or transparent), neutral wire (white wire or white marking) and ground wire (bare wire or green wire or marking) with the matching screws. The screws are easy to identify, but the wires are all silver in a clear plastic insulation. How do identify which wire to match with the appropriate screw?
    tommybwiz's Avatar
    tommybwiz Posts: 58, Reputation: 2
    Junior Member
     
    #2

    Jul 18, 2012, 12:15 PM
    Generally, this type of cord is marked with lettering on the hot wire, and the neutral has ribs running the length of it. You can usually feel the ribs with a fingernail across the wire.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jul 18, 2012, 01:34 PM
    If all else you will need to use a continuity tester to see which is ground, then the hot and neutral.
    Touch 1 lead to the Enclosure and then the 3 leads to determine ground wire. Repeat for hot and neutral.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Track 12V Pendant Light not working [ 3 Answers ]

I installed the track and pendant lights several months ago and all worked fine. Then we had a light blow and when we replaced the bulb it worked for a while and then doesn't work anymore. New bulb tested in other pendant works fine. Moved pendant to another location on track and no luck. I...

What wires to hook up on a pendant light [ 1 Answers ]

I have two bare wires on light and one black wire one white wire and a ground wire what wires go where?

I am looking for a transformed for a Hampton Bay pendant track light E204150 [ 0 Answers ]

I am looking for a transformer for a Hapton Bay pendant track light E204150 EC8730/343-565 KL

Can I cut track lighting track (hampton bay) to custom length [ 1 Answers ]

I want to create a u-shaped layout for my hampton bay track lighting within a specifically defined space. To achieve this, I would need to shorten one track. Can the track be cut and maintain electrical continuity.

Hampton Bay track light - pendant light cord length [ 2 Answers ]

How can I shorten the length of the light cord on a Hampton Bay track system ? There is a tube that plugs into the track that has a serries of screws but there is also a screw at the light base also.


View more questions Search