Ask Experts Questions for FREE Help !
Ask
    Bobbie hvac's Avatar
    Bobbie hvac Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2012, 04:22 PM
    Nordyne E1EB-012HA
    My nordyne furnace won't kick off. If you turn the power on it immediately brings on the heat strips and blower. I unhooked all the stat wires and it still ran the heat strips and fan ,please help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 16, 2012, 05:35 PM
    Quote Originally Posted by Bobbie hvac View Post
    My nordyne furnace won't kick off. If you turn the power on it immediately brings on the heat strips and blower. I unhooked all the stat wires and it still ran the heat strips and fan ,plz help
    Depending upon your model number you have a defective relay OR a defective heater sequencer which acts as a relay also. You really need to test it with a electric meter to be sure which component is defective. One final note. Be sure your thermostat wire is not damaged or better yet unhook the thermostat wires from the indoor unit itself not the thermostat and then test. You just mentioned you unhooked the stat wires so I figured you disconnected the wires at the thermostat and not the unit itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne e1eb-012ha wiring schematics [ 1 Answers ]

Nordyne e1eb-012ha wiring diagram [ 1 Answers ]

Schemetic for Nordyne E2EB-012HA [ 1 Answers ]

I need a schemetic for a Nordyne furnace model E2EB-012HA:)

What's wrong with my Nordyne, E1EB-020HA blower? [ 2 Answers ]

I have a Model# E1EB-020HA Nordyne central heat & air unit. The blower stopped working. There are two breakers on the base of the unit itself. I flipped them off, waited, and flipped them back on and the blower kicked in. I moved my thermostat from fan to auto and it went back off. I tried the...

Nordyne. E1EB-015HA [ 1 Answers ]

Nordyne model E1EB-015HA How do I check the sequencer's and limit switches what are the omh's values or what should be open or closed on the bench, I have the furance and coils on the bench for testing. Unit blows transformer in service. Was great before I cleaned the cooling coils above the...

View more questions Search