Ask Experts Questions for FREE Help !
Ask
    vansellers's Avatar
    vansellers Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2012, 09:29 AM
    Mower want move forward but will back up
    Replace drive disc .the chain case will move to reversr and back up it moves to netural freely but will not go to 12345 . Tap chain case with a hammer still won't go to 1 gear there are no burrs or durt on the octogon shaft . Chaincase slide freely to R and back up but not forward need help
    joe199178's Avatar
    joe199178 Posts: 19, Reputation: 1
    New Member
    		  
    #2

    Jul 15, 2012, 01:14 PM
    Needs new planitary gear
    vansellers's Avatar
    vansellers Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jul 16, 2012, 02:46 PM
    Quote Originally Posted by joe199178 View Post
    needs new planitary gear
    Thanks Joe. I'll try that. I don't have a parts book ,I will try the internet , if you know of a web site I'd appreceiate it thank you again van.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Jul 18, 2012, 04:34 PM
    Hi,
    There is a rod welded to the drive case that fits in a slot with a "v" at the neutral location that moves it away from the drive plate on the bottom of the engine. Something is preventing it from going into the forward speed ranges. Provide some numbers and I will either upload the parts breakdown or give you a link.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Craftsman mower 917.377795 and will go forward, but locks up going back. [ 3 Answers ]

I have a Craftsman mower 917.377795 and will go forward, but locks up on the rear wheels when trying to pull it backwards.

Craftsman Mower 502255822 will not move forward or reverse! Any thoughts? [ 1 Answers ]

The tractor just stopped moving. All belts appear to be in the correct positions.

Yardman mower won't move forward or reverse [ 2 Answers ]

I have a yardman mower that won't go when I put it into gear. Is there anything besides the drive belt that could be the problem. The last time I used the mower, I ran out of gas at the end, so I just pushed it into the shed. Now it won't go into gear. Thank you.

Mower wouldn't move forward/backward, broken spring [ 3 Answers ]

Craftsman 42" tractor (Model# 917272453) stopped moving. I felt the brake/clutch go down with a clunk right before it happened. When in gear I can pull UP on the clutch (engaging the belt) and it moves just fine. I thought the belt had stretched and failed, this happened in 2003 (when mower was...

View more questions Search